Ensuring High Precision

Absolutely Stable Cutting

AC8000P series grade developed by Sumitomo for steel turning features advance ABSOTECH plantinum CVD coating for longer tool life and overall cost reduction. It consists enhancement of crystal-controlled alumina layer for AC8015P, surface-smoothing treatment for AC8025P and coating stress control for AC8035P.

High Speed

AC8015P is most suitable for high speed and it offers wear resistance during high-speed, high efficiency steel cutting. Its edge treatment and newly developed coating result in twice the crater wear resistance compared to conventional grades.

 Conventional
AC3015P
Reduced crater damage due to chip abrasion through optimized crystal orientation in the alumina layer.

Surface Smoothness 

AC8025P is designed to be reliable during general purpose steel cutting, the AC8025P grade’s special surface treatment results in improved tool surface smoothness and increased adhesion and chipping resistance.

 Conventional 
AC8025P

Conventional

AC8025P


Excellent Stability

The AC8035P grade provides stability during interrupted steel cutting. The surface treatment reduces residual tensile stress in the coating for increased fracture resistance.

Conventional
                                  
AC8035P
                                            

Ultra-refined Universal Cutter

New WEZ series is a high precision shoulder milling cutter which can be used in variety of application. The combination of high precision moulding technology and optimised cutting edge shape contributes to superb wall surface accuracy, surface quality and burr control. The specially designed cutter also enables a larger ramping angle.

WEZ also has a wide grade and chipbreaker selection. First, newly developed ACU2500 grade supports machining for steel, stainless steel and cast iron material. Second, F type chipbreaker coupled with grounded treatment shows excellence in sharpness which enables low machining resistance and suppresses burrs. Third, P type chipbreaker enables wall surface squareness equal to solid carbide endmills. Sumitomo has also wide sizes in stock from D14mm to D160mm.

Applicable to various applications

Optimised body design

Wide guide face for stable insert clamping .

Lower cutting force helps reduce machining noise

Please feel free to contact us or email to info@sumitec.com.my if you require any further information for your business growth. Our team is ready to offer advice and solution for you.

 SUMITEC SDN BHD

No. 35, Jalan Tiong Emas, Kawasan Perindustrian

Tiong Nam, 81100 Johor Bahru, Johor, Malaysia.

Tel: +607-299 2222   Fax: +607-299 3333

SUMITEC (PG) SDN BHD

1082, Jalan Tok Kangar, Pusat Perniagaan Juru

Avenue, 14100 Simpang Ampat, Pulau Pinang, Malaysia.

Tel: +604-502 0234/+6016-416 8616 Fax: +604-502 0148

SUMITEC (K.L.) Sdn Bhd

No. 44, Tkt 1, Jalan Sungai Rasau D 32/D, Berjaya

Park, Seksyen 32, 40460 Shah Alam, Selangor, Malaysia.

Tel: +603-5525 2183   Fax: +603-5525 3812

Ensuring High Precision

Subscribe to our newsletter and stay up to date with all events coming straight in your mailbox:

* Personal data will be encrypted

Close