1 flute long neck radius end mills for super finishing.
Improved quality for milling on the bottom, inclined and vertical surfaces as compared to conventional series.
Perfect Surface Finishing
Optimised CBN material and improved cutting edge geometry for milling the ultra hard materials offer high precision milling and long tool life.
By excellent wear resistance and chipping-resistance of the tool outstanding surface roughness and precision are maintained even under long cycle time.
Recommended to use on finishing process for the ultra-hard materials.
Improvement of cutting edge geometry
Long Tool Life For Milling Hardened Material Over 60 HRC
Newly developed “HMGCOAT” by Union Tool which offers high wear resistance compared to Hardmax and long tool life for milling hardened materials over 60 HRC.
New tool geometry with optimized rake and relief angle for milling hard materials improves breakage resistance.
HMGCOAT – HGB
2 flutes ball end mills for hard materials.
Wear comparison with length of cut
HMGCOAT – HGLB
2 flutes long neck ball end mills for hard materials
Wear comparison with effective length
Please feel free to contact us or email to firstname.lastname@example.org if you require any further information for your business growth. Our team is ready to offer advice and solution for you.
SUMITEC SDN BHD
No. 35, Jalan Tiong Emas, Kawasan Perindustrian
Tiong Nam, 81100 Johor Bahru, Johor, Malaysia.
Tel: +607-299 2222 Fax: +607-299 3333
SUMITEC (PG) SDN BHD
1082, Jalan Tok Kangar, Pusat Perniagaan Juru
Avenue, 14100 Simpang Ampat, Pulau Pinang, Malaysia.
Tel: +604-502 0234/+6016-416 8616 Fax: +604-502 0148
SUMITEC (K.L.) Sdn Bhd
No. 44, Tkt 1, Jalan Sungai Rasau D 32/D, Berjaya
Park, Seksyen 32, 40460 Shah Alam, Selangor, Malaysia.
Tel: +603-5525 2183 Fax: +603-5525 3812